SnoLite data collection system $799

6 channel, 2mb memory, internal battery powered, two box system.
System includes: MyChron display, Infra-red lap timing beacon,
beacon power cord, Infra-red lap timing receiver, sensor excitation
circuitry, USB download cable, complete Race Studio2 software
including all updates, complete electronic manuals for setup,
configuration, logging and analysis.

Sensors included:
rpm pickup
fast response EGT sensor
coolant/oil temp sensor
built-in accelerometer
shaft speed sensor

Optional available sensors:
Special design, fast acting K-type thermocouples* $89
custom built, special lead lengths, CJC terminals
(spare sensors are highly recommended)
Coolant temperature sensor* $36
to display and log coolant temperature
Engine speed sensor* $65
uses inductive sensor at stator
Axle/wheel shaft speed sensor* $81
includes magnet, sensor & hardware
Spark plug seat thermocouple $73
used to evaluate ignition timing
Inlet air temperature sensor $99
using fast acting thermistor
Oil temperature sensor $36
to display and log oil temperature
Coolant sensor tap for water hose $30
used to install sensor in coolant hose, 5/8", 3/4", 1"
Battery charger $25
can be used for NiCad and NiMH type batteries

Includes one year warrantee on electronics, and product
technical/troubleshooting support from PAR.
System and sensors pre-tested by PAR prior to delivery
*indicates sensors included with base system.

SnoPro data collection system $995

10 channel (4 analog channels plus digital TPS), 2mb memory,
external power, single box system.

System includes: MyChron display, Infra-red lap timing beacon,
beacon power cord, Infra-red lap timing receiver, sensor excitation
circuitry, Mil spec wiring harness, USB download cable, carrying/
storage case, complete Race Studio2 software including all updates,
complete electronic manuals for setup, configuration, logging & analysis.

Sensors included:
rpm pickup
fast response EGT sensor
coolant/oil temp sensor
shaft speed sensor

Optional available sensors:
Special design, fast acting K-type thermocouples* $89
custom built, special lead lengths, CJC terminals
(spare sensors are highly recommended)
Coolant temperature sensor* $36
to display and log coolant temperature
Engine speed sensor* $65
uses inductive sensor at stator
Axle/wheel shaft speed sensor* $81
includes magnet, sensor & hardware
Spark plug seat thermocouple $73
used to evaluate ignition timing
Stainless steel cable string potentiometer $175
used for throttle, steering position, linear motion
Bosch Motorsport broadband lambda sensor $285
only really effective way to set air/fuel ratio
Installation kit for lambda sensor $95
includes weld bung, power and sensor wiring harness
Remote mounted accelerometer $185
used for track mapping, recording G forces
Inlet air temperature sensor $99
using fast acting thermistor
Infra-red non-contact thermocouples (1:1 focus) $165
used for instantaneous surface temperatures
Engine resonant tuned detonation sensor $140
detects engine knock signals to avoid detonation
Crankcase pressure sensor $139
used to measure compression and ring blowby
Fuel pressure sensor $139
to display and log fuel pressure 0-100psi
Inlet air pressure sensor $95
used for turbo boost pressure 0-30psi
Boost/fuel differential pressure $139
measures difference between boost and fuel pressure
Oil pressure sensor $139
to display and log oil pressure
Oil pressure sensor switch $125
to disable ignition if oil pressure falls below set limit
Oil temperature sensor $36
to display and log oil temperature
Coolant sensor tap for water hose $30
used to install sensor in coolant hose, 5/8", 3/4", 1"
Drive belt slip sensor $160
uses optical sensor to determine belt slippage
Customized CJC t/c extension cable leads $45
Customized length data cable extension leads $45
External rechargeable battery NiCad 9.6v $40
Battery charger $25
can be used for NiCad and NiMH type batteries

Includes one year warrantee on electronics, and product
technical/troubleshooting support from PAR.
System and sensors pre-tested by PAR prior to delivery
*indicates sensors included with base system.

SnoLog data collection system $1299

14 channel (5 analog channels plus digital TPS), 8mb memory,
external power, two box system. Logs all available digital
channels from on-board ECU.

System includes: MyChron display, Infra-red lap timing beacon,
beacon power cord, Infra-red lap timing receiver, sensor excitation
circuitry, USB download cable, carrying/storage case, complete
Race Studio2 software including all updates, complete electronic
and hardcopy manuals for setup, configuration, logging & analysis.

Sensors included:
rpm pickup
fast response EGT sensor
coolant/oil temp sensor
twin axis built-in accelerometers
shaft speed sensor

Optional available sensors:
Special design, fast acting K-type thermocouples* $89
custom built, special lead lengths, CJC terminals
(spare sensors are highly recommended)
Coolant temperature sensor* $36
to display and log coolant temperature
Engine speed sensor* $65
uses inductive sensor at stator
Axle/wheel shaft speed sensor* $81
includes magnet, sensor & hardware
Spark plug seat thermocouple $73
used to evaluate ignition timing
Stainless steel cable string potentiometer $175
used for throttle, steering position, linear motion
Bosch Motorsport broadband lambda sensor $285
only really effective way to set air/fuel ratio
Installation kit for lambda sensor $95
includes weld bung, power and sensor wiring harness
Remote mounted accelerometer $185
used for track mapping, recording G forces
Inlet air temperature sensor $99
using fast acting thermistor
Infra-red non-contact thermocouples (1:1 focus) $165
used for instantaneous surface temperatures
Engine resonant tuned detonation sensor $140
detects engine knock signals to avoid detonation
Crankcase pressure sensor $139
used to measure compression and ring blowby
Fuel pressure sensor $139
to display and log fuel pressure 0-100psi
Inlet air pressure sensor $95
used for turbo boost pressure 0-30psi
Boost/fuel differential pressure $139
measures difference between boost and fuel pressure
Oil pressure sensor $139
to display and log oil pressure
Oil pressure sensor switch $125
to disable ignition if oil pressure falls below set limit
Oil temperature sensor $36
to display and log oil temperature
Coolant sensor tap for water hose $30
used to install sensor in coolant hose, 5/8", 3/4", 1"
Wheelspeed splitter cable $85
allows use of multiple wheelspeed sensors
Drive belt slip sensor $160
uses optical sensor to determine belt slippage
Customized CJC t/c extension cable leads $45
Customized length data cable extension leads $45
External rechargeable battery NiCad 9.6v $40
Battery charger $25
can be used for NiCad and NiMH type batteries

Includes one year warrantee on electronics, and product
technical/troubleshooting support from PAR.
System and sensors pre-tested by PAR prior to delivery
*indicates sensors included with base system.