Frogzskin Vents are the newest technology in engineered intake and cooling vents. Their Patent Pending design produces a thin flexible OEM looking vent that can be applied to most any contoured or curved surface. Frogzskin's manufacturing process utilizes the latest technology in Micro-Fiber materials. Woven to specific quality standards allowing maximum air-flow and hydrophobic characteristic to repel water and snow. Industrial grade adhesive, tested in excess of -40F, are used to meet the demanding requirements of the aftermarket and OEM manufacturers. Frogzskin's Universal Kits can be used in multiple locations, in combination with multiple sizes or model specific kits to maximize cooling airflow Frogzskin's model specific vent kit designs allow air-flow to reduce the power robbing under-hood heat from building up all while keeping out snow and debris. Virtually eliminating the heavy snow and ice build up in the nose, belly pan, and side panels. Frogzskin's Patent Pending design produces a thin low profile vent that will not catch or entrap snow and debris. No unsightly rivets, screws, snaps or bulky frame works. Industrial grade adhesives allow a fast and easy peel-n-stick application. Model specific kits are available for all most all late model machines. Frogzskin's open design increases airflow to reduce performance loss due to heat saturation. Clutches run cooler for better performance and improved belt life. Exhaust side vents allow heat to escape and not build up under the hood. Frogzskin's work with the plastic OEM vents to protect from fine powder snow and debris. Ideal for deep snow conditions providing easy and economical protection the looks great! MADE IN THE USA |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
Handguard flares shown installed on sled.
|
|
|
|
|
|
|
|
|
|
|
|
1Bionic Neck Support (BNS)
Bionic SB Support
BNS Video Part 1
BNS Video Part 2
|
|
|
|
How to size the Asterisk Cell Knee Brace:
The circumference chart is a guideline only. This chart is used to help indicate the appropriate size. The most important indicator is the Mid Kneecap measurement. This measurement should be the basis for the size. To ensure a proper fit, circumference measurements should be taken directly on the skin with the leg straightened, using a soft tape measure. (If a soft tape measure is not available, a piece of string or yarn may be used to calibrate the leg's diameter, then measured against a hard tape measure). Locate the middle of the kneecap and measure around the leg. Measurements should be taken directly on the skin with a straight leg.
| Size |
(in) |
(cm) |
|
| Small |
13" - 13 7/8" |
33.02 - 35.24 |
| Medium |
14" - 14 7/8" |
35.56 - 37.78 |
| Large |
15" - 15 7/8" |
38.10 - 40.32 |
| X-Large |
16" - 16 7/8" |
40.64 - 42.86 |
| XX-Large |
17" - 18 1/4" |
43.18 - 46.36 |
click here for asterisk catalog
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
